校准和测试
为了帮助客户获得正常的设备性能表现,萨孚公司提供全面的校准和测试服务,这些服务内容符合适用的法规标准。 萨孚流体控制公司的设施和设备基准与适用的行业标准保持一致,提供如下服务:
|
仪表和设备校准
压力测试
真空测试
密封泄漏测试
性能测试
产品完整性测试
|
Expertise and Scope of Service
Stockist and indentor of valves, flanges, fittings and related pipeline components. Our pre-vetted approved manufacturers provide assurance of quality which is further enhanced by our supply chain risk capability.
Quality Assurance System
A documented QA system is in place, operating in accordance with AS/ISO 9001. A copy of our QA manual is available on request. Quality Assurance Assessors: LRQA Business Assessors: LRQA, Business Assurance (Lloyds). We also operate the 5S continuous improvement system which is third party audited by Lloyds under our ISO 9001 management system.Occupational Health & Safety
SIT operates in accordance with the Occupational Health & Safety Act and specifically in accordance with AS 4801 (OHS AS 18001).
Certification
Certification is supplied in accordance with EN10204.3.1 (DIN 50049.3.1) on all products supplied.
QA REQUIREMENTS COVERED
Applicable quality assurance
Applicable manufacturers data sheets
In compliance with required standards and approvals
Fully guaranteed with warranty and full factory material and test certification
Available NDT 无损检测
检测说明
|
适用标准
|
测试范围
|
燃料渗透
|
ASME V - Art. 6 and 24
|
10% on pressure containing
|
ASTM E165
|
parts for non magnetic materials
|
ANSI B16.34 - Annex D
|
(100% upon customer request)
|
磁粉干湿度
(dry and wet)
|
ASME V - Art. 7 and 22
|
10% on pressure containing
|
ASTM E709
|
parts for magnetic materials
|
ANSI B16.34 - Annex C
|
(100% upon customer request)
|
X射线和γ射线
|
ASME - V - Art. 2 and 22
|
Upon customer request
|
ASME VIII - Div 1
|
Upon customer request
|
ANSI B16.34 - Annex B
|
ASTM E142-E94 -E446-E186-E280
|
超声波Ultrasonic
|
ASME V - Art. 4 and 23
|
|
ASME VIII - Div 1
|
|
ASTM A388
|
|
静液压和气压
Hydrostatic and pneumatic
|
API 6D, API607 and API 6A
|
|
BS 5146 and 6755
|
|
MSS-SP61 or to customer specs
|
|
Stem torque
Visual and dimensional
|
API 6D and to customer requirements
|
|
Applicable ASTM Standards
|
|
MSS-SP 44 and SP55
|
100.00%
|
ANSI B16.34, B16.50, B16.10
|
|
API 6D and 6A, BS 2080
|
|
Alloy verification
Hardness
高压气体测试
High pressure gas tests
|
Texas analyser 9266
|
|
Nace MR01-75
|
100% of wetted components
|
customer specifications
|
A. EXPEDITING AND SERVICES
SIT specialises in providing full service packs on your orders.
The following services are available:
expediting activities
Global Sourcing
Global Supply
|
inspections at sub-contracting units
final testing witness inspections
certification review
B. INSPECTION AND TESTING ACTIVITIES
Thanks to the experience gathered during many years of activity in the supply of products to major Australian and off-shore companies,
SIT can provide professional competence in the management of a third party survey, review and witness of any required non-destructive tests in Adelaide or ex overseas factory, such as:
X-Rays
Ultrasonic Tests
Magnetic Particle Inspection
Positive Material Identification (in-house facilities)
Dye Penetrant Liquid Inspection (in-house facilities)
As well as the following product tests:
pressure tests - pneumatic (in-house facilities)
pressure tests - hydraulic (in-house facilities)
pressure tests - gas high pressure tests (in-house facilities)
helium fugitive emission tests
Also functional tests for special applications:
low temperature tests
cryogenic tests
fugitive emission tests
functional test on actuated equipment (in-house facilities)
torque testing (in-house facilities)
The above activities usually require the use of special tools, equipment and qualified personnel normally provided by the manufacturer or by external qualified laboratories.
Upon request SIT can employ the services of independent and qualified institutes and laboratories to perform the inspection activities "on-site" or in neutral facilities. These survey and surveillance activities depend on collaboration with the manufacturer of the products to be supplied to Global Supply Line.
C. PROJECT INSPECTION ACTIVITIES
For any of your orders, SIT can perform or arrange, with strict attention to detail, the following activities. All activities are kept under full control of professional, specialist staff.
|
|
UPON REQUEST
|
Preliminary check to verify that the supplier has put in production the
order according to the client's specifications, rules and parameters.
|
|
|
Follow up and expedite visits (on major projects) to verify that production
is underway and the suppliers comply with contractual delivery dates.
|
|
|
Final review, or witnessing of inspection activities to confirm the final supply stages.
|
|
|
Certification review
|
|
|
Witnessed inspection during NDT, performed by independent authorised
laboratories (UL, MPI, PMI, DPI, X-ray tests)
|
|
|
Witnessed inspection during special product/ equipment testing (low
pressure tests, helium tests, fugitive emission tests)
|
|
|
Dimensional checks
|
|
|
Painting inspection
|
|
|
Packing inspection
|
|
When required, all the above activities are recorded by Global Supply Line and duly reported to its clients with written and photographic reports.
The above services, usually agreed upon at the time of order, ensures the client that the quality of the product is assured at a fixed price, preventing delays in delivery that may be caused by late detection of any non-conformity. SIT selects its suppliers based on quality, liability and servicing.
PMI TESTING
Complete original factory test reports are supplied for all products in accordance with DIN EN10204.3.1 (50049.3.1). All material test reports are permanently maintained and always available through our MTR software. In addition to standard material testing performed at the manufacturing level, we maintain an advanced X-ray analyser providing the in-house ability to issue certificates of chemistry which increases customer confidence and allows for a high level of quality control.
SIT offer positive material identification if required for a small surcharge and with no delay. We have non destructive metallurgical X-ray testing capability for the following chemical elements : A105, WCB, LCB, LF2, LCC, WCC, CF8, CF8M, F51, F53, A20 and Monel.
All product is supplied with factory 50049 3.1 certificate, however should you require additional assurance that the body, bonnet, wedge/disc/ball and stem meets the required material specifications , in-house PMI testing can be done using the latest Bruker (S1 Sorter) testing device.